MP301 Jams Printing Labels

[Garyb]

Client using clear labels and they peel off and stick to the hot roller. None of the various settings (thick Paper or Labels )seem to slow the output down. Am i missing something? Using the Bypass as well as the tray. The labels are for laser printers also.
Any help would be greatly appreciated.

Thanks

[Eric1968]

If they peel off during printing, there's little to do about it. You can't change the paper path, or slow down copy speed. It's the same with envelopes. The specs say that it's possible, but in practice you can have trouble.

[ruben]

Are they paper backed?

[Garyb]

I'm fairly certain they are.

[Garyb]

Here's the rub, the old MP201 ran them fine but it ran slower so of course the client wants to know why this one won't run them.

Good question and i don't have an answer.