Thanks:
0
Dislikes:
0
-
Ricoh MP 5002 Developer Change (Entering lot number)
I am changing the developer for a Ricoh MP 5002. I can't find the manuals which I really need (I miss Paul) Am having trouble entering the lot number to set the TD sensor in the developer set up. I have entered every number I can find and it still won't execute the set-up. Any help will be soo appreciated...
-
Senior Tech
250+ Posts
- Rep Power
- 31
Re: Ricoh MP 5002 Developer Change (Entering lot number)
You can put any number in there you want. The lot number is for Ricoh tech support when you call a problem in. You can just put the date in: example (021515) hit the # key, execute, yes, off you go. Be SURE to either take the toner hopper out or put a piece of paper between the drum unit outlet and developer unit inlet to block any toner from falling out of the hopper and over toning the new developer.
-
Senior Tech
250+ Posts
- Rep Power
- 31
Re: Ricoh MP 5002 Developer Change (Entering lot number)
PM me and I will do you a solid with the parts and service manual since you are a fellow Okie. I grew up in Lawton and worked in Stillwater before moving to Arizona.
-
Technician
- Rep Power
- 19
Re: Ricoh MP 5002 Developer Change (Entering lot number)
-
Technician
- Rep Power
- 19
Re: Ricoh MP 5002 Developer Change (Entering lot number)
Hi guys thanks for joining you.
I had a problem with bizhub 195 . It displays "bios mode" when I switch on the machine and I try installing the FW it says the device is not ready.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks