Thanks:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 25
Error code T96-972
Replaced Junction PCB; paper feed, then error T96-972 was displayed. Can anyone advised what can be causing this error?
-
Re: Error code T96-972
More info please, make, model, why were you replacing pcb? The code says data not input, rev data storage area not initialized, this is from the RZ manual. Try reboot with holding reset key.
Good luck.
-
Senior Tech
100+ Posts
- Rep Power
- 25
Re: Error code T96-972
Riso mode is EZ-220. Replaced RF PCB due to error code T98-25.
After replacing RF PCB then T96-972 is displayed.
-
Re: Error code T96-972
Which RF pcb did you replace? Ink or master? Recheck your connectors. Try turning on while holding the reset key until unit is done rebooting.
Good luck.
-
Trusted Tech
50+ Posts
- Rep Power
- 19
Re: Error code T96-972
in test mode 9874 for protected area settings then 1193 1197 (or 1198)
Sent from my HTC Desire 820s dual sim using Tapatalk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks