The problem is printing stops and machine gives B paper jam error. (X02-1078-1) Although i get jammed paper out, B jam error continues without any paper inside. after i turn off and turn on the machine and refresh printing console, (X30-1125-0) B jam error disappears.at printing attemps from standard tray to stacking tray only one page is printed and than the machine stops and paper jams in C section before the paper is out to the stacking tray. when printing from 1 -2 -3 trays, the paper do not reach to the face down tray and jams in C section with B paper jam warning.
As I'm trying to give feedback because perhaps similar problems and conditions can be encountered: After making sensor sensivity adjustment, the problem solved. 1- test mode No.1498 to automatically feed the paper to the two sensors 2- test mode No.1494 to automatically adjust the sensitivity of the two sensors.
Bookmarks