Hello,
I was trying to print on my black drum with a squeezed ink ( from United States Ink cartridge to an European one) , and it says as there is no ink on the tube.
Any idea on what´s happening? Squeezing it was pretty succesful, with no much ink around and filling more than half the tube. Some test were printed until the light of no ink appear...
If you have any idea on how to cope with this... ( as far as buying new black european tubes!)
THank you very much!
Jabilin
The RFID chip on the bottle is telling the machine it is is empty. I know no way around that.
Therefore, is best to squeeze when there is not empty at al? Right?
thabks!
Originally Posted by Iowatech
I suppose that would be a way to get a little more life out of an ink bottle sometimes. But the RFID chip only records the amount of time that the ink pump is on, and at the time the machine determines that the pump has been on long enough it identifies that bottle as empty (whether there is ink left or not) and that bottle can no longer be used. So don't add too much ink or you will be wasting it.
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks