Thanks:
0
Likes:
0
Dislikes:
0
-
RZ 390UI P19-207 and Master Making Unit Issues
Hello!
I have a RZ 390UI and am having issues with the master making unit. The error code is P19-207, which in the tech manual says the error condition is "TPH pressure sensor does not go OFF within 2 seconds after thermal-pressure activates in the decompressing direction, or during home positioning operation". I am not sure what to do fix this, since the Risograph won't unlock the Master Making Unit Release so I can't get in there. Any tips on how to open the Master Making Unit? Or, what to do once I am able to open it?
Thanks!
-
Re: RZ 390UI P19-207 and Master Making Unit Issues
Hi check the gears in the pressure system of tph it has a gear which always breaks has a screw un the middle
-
Re: RZ 390UI P19-207 and Master Making Unit Issues
Thanks! That part was broken, just ordered a new one to replace!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks