Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Jun 2016
    Location
    Philadelphia, PA
    Posts
    3
    Rep Power
    0

    Angry RZ 390UI P19-207 and Master Making Unit Issues

    Hello!

    I have a RZ 390UI and am having issues with the master making unit. The error code is P19-207, which in the tech manual says the error condition is "TPH pressure sensor does not go OFF within 2 seconds after thermal-pressure activates in the decompressing direction, or during home positioning operation". I am not sure what to do fix this, since the Risograph won't unlock the Master Making Unit Release so I can't get in there. Any tips on how to open the Master Making Unit? Or, what to do once I am able to open it?

    Thanks!

  2. #2
    Trusted Tech 50+ Posts
    RZ 390UI P19-207 and Master Making Unit Issues

    VENRISO's Avatar
    Join Date
    Jul 2015
    Location
    caracas
    Posts
    71
    Rep Power
    18

    Re: RZ 390UI P19-207 and Master Making Unit Issues

    Hi check the gears in the pressure system of tph it has a gear which always breaks has a screw un the middle

  3. #3
    Junior Member
    Join Date
    Jun 2016
    Location
    Philadelphia, PA
    Posts
    3
    Rep Power
    0

    Re: RZ 390UI P19-207 and Master Making Unit Issues

    Thanks! That part was broken, just ordered a new one to replace!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here