Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Oct 2016
    Location
    Edinburgh
    Posts
    1
    Rep Power
    0

    RISO TR1530/1510 Masters Jammed

    The masters on my TR1530/1510 seem to be getting jammed on the way into the master tray resulting in multiple masters applying themselves to the drum.
    I can pull them out at the other end but obviously I'd rather if they fell into the receiving tray.

    Any tips?


  2. #2
    Just a fellow wanderer 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,746
    Rep Power
    79

    Re: RISO TR1530/1510 Masters Jammed

    I apologize for the delay, but what's most likely causing that issue is that one or more of the o-rings in the disposal area has failed or come off the pulleys it rides on.
    For what it's worth, here's a diagram of how the disposal unit should look:
    Master disposal.pdf
    That diagram is from the CR line, which was the updated version of your machine's chassis, but from what I've seen the disposal area is exactly the same as the TR line.
    The result from that would be that the blank area of the undisposed master that leads up to the master clamp on the drum would be neatly folded back on itself under the new master. If that is not the case, it is likely that there is something very different going on.

    Last edited by Iowatech; 10-24-2016 at 01:32 AM. Reason: Missing punctuation

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here