Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: RISO RZ 390 UI

  1. #1
    Junior Member
    Join Date
    Jan 2017
    Location
    McKeesport
    Posts
    4
    Rep Power
    0

    RISO RZ 390 UI

    right now i am having a horible time trying to find out how to correct an error code on my riso rz390 ui

    the error code is: p05-604

    i had an inking problem from not having oem ink and now i think its jumped out of time or something.....


    SOMEONE PLEASE HELP ME!!!!!


  2. #2
    Senior Tech 250+ Posts 20gaugeO/U's Avatar
    Join Date
    Feb 2009
    Posts
    431
    Rep Power
    23

    Re: RISO RZ 390 UI

    It's actually T05-604, something lost in Riso Translation. Vertical Print Positioning motor lock is the code. Turn the machine off, hold the yellow reset down and keep it held down while the machine boots up, when it stops beeping and things stop moving release the reset key.
    The motor is in the upper right area when the back cover is off. If you think the machine is out of time you'll need a Tech Manual to check all the timing marks and know what you are looking at. Take the back cover off and take a can of air to the sensors in the back (behind the 2 large PCB's).


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here