Thanks:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
RISO RZ 390 UI
right now i am having a horible time trying to find out how to correct an error code on my riso rz390 ui
the error code is: p05-604
i had an inking problem from not having oem ink and now i think its jumped out of time or something.....
SOMEONE PLEASE HELP ME!!!!!
-
Re: RISO RZ 390 UI
It's actually T05-604, something lost in Riso Translation. Vertical Print Positioning motor lock is the code. Turn the machine off, hold the yellow reset down and keep it held down while the machine boots up, when it stops beeping and things stop moving release the reset key.
The motor is in the upper right area when the back cover is off. If you think the machine is out of time you'll need a Tech Manual to check all the timing marks and know what you are looking at. Take the back cover off and take a can of air to the sensors in the back (behind the 2 large PCB's).
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks