Error d-04 534

[mdm]

Good day, I wanted to get some help with a problem I am having with a
with a Riso 390 UI. It is showing an error d-04 534, I look up the error code d-04 534 and found that the ink is wrong. I replace the drum and ink and I am still getting the same error. Any idea what this could be?

[laitang]

RZ390UI need Rizo S4254 ink.

259882.jpg

[mdm]

Thanks Liatang,
that is the ink I am using, Can it be that I have to reinstall drum? If so why?

mdm

[hader1967]

Hi ....
Why you Replace The Drum What is The Reason ?

[Iowatech]

Probably the RF tag on the ink bottle is bad, unless you accidentally put the wrong color ink in that drum.

[hader1967]

Hi Which Color Did You used Right Now ????
Which Model Do You Have RZ 390 OR EZ 390 ???

[mdm]

Hi right I am using black, no color.
I have tried a new drum and a new toner, but I am still getting the same error.
Could it be a board.

mdm

[hader1967]

Hi right I am using black, no color.
I have tried a new drum and a new toner, but I am still getting the same error.
Could it be a board.

mdm

Hi Check This Test Mode : Activate Test Mode No.9874 to go into the protected area test mode
Drum Code Entry: Inter Code 1210 : To Sets the print drum information on the EEPROM of the Drum PCB.
Range : 0 to 255

Setting:[ EZ2/EV2 Series ]


98: B4 99: A4 / Letter
102: Legal / Foolscap


[ EZ3/EV3 Series ]
113: A3 114: B4 115: A4 / Letter
117: Ledger


Default : 0

Drum Serial Code Entry 1: Inter Test Code:1211
Inputs the first 4 -digits of the print drum serial number
Range : 0 to 9999
Unit : 1
Default : 0

Drum Serial Code Entry 2 Inter Test Code :1212
Inputs the last 4 -digits of the print drum serial number
Range : 0 to 9999
Unit : 1
Default : 0

Drum Color Code Entry : Inter Test Code : 1214
Sets the print drum color information on the EEPROM of the Drum PCB.
Setting:


0: Not Specified <default>
1: Black
2: Blue
3: Medium Blue
4: Red
5: Bright Red
6: Riso Federal Blue
7: Purple
8: Riso Marine Red
9: Burgundy
10: Green
11: Teal
12: Brown
13: Yellow
14: Light Grey
15: Grey
16: Fluorescence Pink
17: Fluorescence Orange
18: Orange
19: Flat Gold
20: Hunter Green
21: Crimson
30: Custom
31: Order (with specified paper)
32: Order (without specified paper)
63: Any Color

[John Lorusso]

I am on a RISO SF9450 and this worked for me:

Error: D04-534
Wrong-type Ink Cartridge Installed or Cannot Read Ink Info Replace Ink Cartridge or Contact dealer/Riso Office


Solution:
1: When the printer is off, keep press and holding the left and right buttons, then switch the printer on. It should now show a "TEST MODE" splash-screen on the display,
2: Input number"9874", and press"Start”,
3: Input number "1214", and press "Start",
4: Input the number associated to the color, and press "Start”,
Color code: black (1), blue (2), medium blue (3), Red (4), bright red (5), Riso Federal (6), Purple (7), Riso Marine Red (8), Burgundy (9), Green (10), Teal (11), Brown (12), Yellow (13), Light grey (14), Grey (15), Fluorescence Pink (16), Fluorescence Orange (18), Orange (19), Flat Gold (19), Hunter Green (20), Crimson (21), If the color is not listed above, set it to (63).
5: Turn off the printer and turn on again.