Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    May 2013
    Location
    Kampala
    Posts
    47
    Rep Power
    10

    GR 3750 Check Paper feed area

    Faulty Power supply caused a fault on my system PCB. Replaced both. Now getting an error at startup "controllare area presa carta" which I guess means check paper feed are. No paper is jammed, Papers loaded to tray but machine cannot work. Tried test mode 97 in vain. Is this caused by the change of system PCB? Any advice?


  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Nov 2014
    Posts
    83
    Rep Power
    8

    Re: GR 3750 Check Paper feed area

    Quote Originally Posted by cokwax View Post
    Faulty Power supply caused a fault on my system PCB. Replaced both. Now getting an error at startup "controllare area presa carta" which I guess means check paper feed are. No paper is jammed, Papers loaded to tray but machine cannot work. Tried test mode 97 in vain. Is this caused by the change of system PCB? Any advice?
    See this post here: it may be the safety bar switch:
    Risograph GR 2750 Check Paper Feed Area advisory message won't go off


  3. #3
    Technician
    Join Date
    May 2013
    Location
    Kampala
    Posts
    47
    Rep Power
    10

    Re: GR 3750 Check Paper feed area

    Quote Originally Posted by filmplane View Post
    See this post here: it may be the safety bar switch:
    Risograph GR 2750 Check Paper Feed Area advisory message won't go off
    Mine seems different issue. Safety bar switch is operating properly,Its switches click when pushed up and click again when released. Even its removal does not help.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here