Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Technician floody's Avatar
    Join Date
    Mar 2017
    Location
    manchester
    Posts
    37
    Rep Power
    15

    ricoh priport 1215

    hi all, Ive been out to Ricoh priport 1215 duplicator and the language has changed to Japanese, anyone know how to set it back to English, I have the manual for this model I need to set the display mode to 1 but doesn't say how to get into service or the actual SPcode to get to the display mode, any help would be much appreciated

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Nov 2012
    Posts
    627
    Rep Power
    34

    Re: ricoh priport 1215

    Service Program Mode Access Procedure (For Engineers)
    All service program modes can be accessed with the following procedures.
    Press the following keys on the operation panel in the following order:
    - Method 1 -
    Clear Modes ⇒ 1 ⇒ 0 ⇒ 7 ⇒ Clear/Stop
    *: Hold down the Clear/Stop key for more than 3 seconds.
    - Method 2 -
    Clear Modes ⇒ Clear/Stop ⇒ Economy ⇒ Enter (#)
    *: For the China machine, use the Combine 2 Original key, instead of the Economy key.
    - Method 3 -
    Turn on the main switch while holding the Start, Clear/Stop, and Enter (#) keys simultaneously.
    NOTE: Method 3 is a special way to enter SP mode that differs from the other two methods. For example, when a service call indicator (E-xx) is displayed at power on, SP mode can only be accessed by Method 3.
    After you enter SP mode with Method 3, you can leave it by turning the main switch off then on again.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here