Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 15
Risos and the pressure system
Hey,
After having issues with the clamps on my RZ970, I had a problem with a transfer belt on the exit (solved), then, another stuck drum problem keeping me busy.
I managed to remove the drum, after identifying the problem was the pressure roller, stuck in high position.
After doing a TM 908 to put the pressure level in home position something like 10 times, finally it moved a little and I was able to remove the drum.
I am currently checking inside the rear of the machine, I have removed the pressure spring to « down » the roller. I am searching for the origin of the problem.... and it seems the absorber (« pressure level shock absorber » in the manual) has... melt? Or it’s just worn.
Just look at this !
IMG_3811.jpg FullSizeRender.jpg
I check and apart from 3mm the whole absorber is, hum, totally exploded.
So my question is, as I don’t really know how much the absorber is vital for the pressure system, do you think it can be the explanation of my problem (pressure roller stuck on high position?)? thanks!
I am currently cleaning all the mess from the absorber. I think I am good for a new one, eheh.
Also, I am trying to adjust the position of the pressure lever, is it possible without drum in the machine?
Last edited by thibaut; 06-09-2017 at 04:03 PM.
-
Re: Risos and the pressure system
Yes you need the absorber that is the cause for the drum removal problem.
I'm pretty sure you need the drum, with a confidential master on, to do the pressure adjustment. That should be in the manual.
Good luck.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks