Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Mar 2008
    Location
    Adelaide, South Australia
    Posts
    54
    Rep Power
    33

    Riso EZ370 error code P-12-301

    HI guys can anyone help. Was making a master then stopped with this error code P-12-301. I cannot remove the used master tray. Seems to be stuck at the back of machine. Thanks

  2. #2
    Field Supervisor 500+ Posts 20gaugeO/U's Avatar
    Join Date
    Feb 2009
    Posts
    547
    Rep Power
    41

    Re: Riso EZ370 error code P-12-301

    Master compression plate motor lock while it was trying to return home. TM 490 should try and drive the plate back to the home position (if all safety switches are engaged). See what you can see before maybe there's a bad disposal jam or a piece of paper went into the disposal box and hung it up.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Mar 2008
    Location
    Adelaide, South Australia
    Posts
    54
    Rep Power
    33

    Re: Riso EZ370 error code P-12-301

    Thanks - all fixed - needed to remove gear from motor so I could manually turn ANd release waste master box then remove jammed master in exit section.
    thanks again

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here