Checked on the slider lift motor in the delivery area for debris but no luck, ran the motor in sp-090 and it was fine couldn't find the sensors in sp5 to test so i want to order the motor and limit sensor but i dont see it in the parts manual. If I'm missing something to look at help is much appreciated. See Attached Thanks
You might want to check on the Ricoh forum for this as Ricoh duplicator techs don't seem to show up here very often.
I've only worked on Risos, so I'm not going to be much help. Sorry about that.
Part manual: Check page 45, 46 : paper exit section 3
Originally Posted by laitang
ok thanks
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks