Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Oct 2015
    Posts
    13
    Rep Power
    18

    Riso GR3770 master sensor issue

    Hello, When I try to load a master on my 3770 I get a master misfeed message. The master roll rolls down into the hopper and doesn't push through to the drum. I have read all the old threads about this and tried everything in them. I have run sensor tests and when I put in #14 Master Sensor, and #15 Master Positioning Sensor, I get non stop beeps, meaning the sensors are not detected. When I put in #47 Master Detection Sensor, and #48 Master Loading Sensor, They are operational. Can someone please help me identify where these sensors are, and what the problem may be? I am at a loss. Thank you so much for your help.

  2. #2
    Riso dude 250+ Posts jermyth's Avatar
    Join Date
    Mar 2011
    Location
    Land of Diffusion
    Posts
    427
    Rep Power
    34

    Re: Riso GR3770 master sensor issue

    First 0.1 second interval beeps is detection, 0.5 second interval is no detection.

    Test mode 14 is master removal hook sensor, it located at the disposal box.
    #15, master positioning sensor, is located on the cutter unit.
    #47, master detection sensor, is located between the master roll and write roller on the right side when facing the master unit.
    #48, master loading sensor, is on the left side between the roll and the roller.

    I strongly recommend you get a service manual and parts manual.
    Good luck.

  3. #3
    Junior Member
    Join Date
    Jan 2020
    Location
    Altamonte Springs
    Posts
    1
    Rep Power
    0

    Re: Riso GR3770 master sensor issue

    QUOTE=jermyth;603602]First 0.1 second interval beeps is detection, 0.5 second interval is no detection.

    Test mode 14 is master removal hook sensor, it located at the disposal box.
    #15, master positioning sensor, is located on the cutter unit.
    #47, master detection sensor, is located between the master roll and write roller on the right side when facing the master unit.
    #48, master loading sensor, is on the left side between the roll and the roller.

    I strongly recommend you get a service manual and parts manual.
    Good luck.[/QUOTE]

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here