Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Trusted Tech 50+ Posts
    rz 390 master not feeding to print drump


    Join Date
    Aug 2014
    Location
    new york new york
    Posts
    77
    Rep Power
    20

    rz 390 master not feeding to print drump

    this happen making the new master ;
    error code : a05 303
    every time do a new job to print , we took out the old master from print drum ,and then machine make new master making procedure
    we took out master removal section : we found the master removal fg motor with black disc ,this black disc broken, first we fix the black disc , but no use
    then we order it to replace , installed to run the test use print test mold 84-85 , machine make a new master , we can see the master in position but it did not do the feeding action to the print drum that means the load pulse motor finished the prepare action ready to feed the master to print drum :
    1. master making we check no problem
    2.master in position ,when new master making action took place : error a05 303 occur we took out master section ,we can see master in position
    a signal did not to active the load pulse motor ,do the feeding to print drum
    what is the reason ,no feeding to the print drum
    any addvice are welcome
    thanks

  2. #2
    Trusted Tech 50+ Posts
    rz 390 master not feeding to print drump


    Join Date
    Aug 2014
    Location
    new york new york
    Posts
    77
    Rep Power
    20

    Re: rz 390 master not feeding to print drump

    this is the part black disc broken
    Attached Images Attached Images

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here