Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Jul 2018
    Location
    lampasas, texas
    Posts
    5
    Rep Power
    0

    drum passing home on ricoh 4450

    The drum goes 1/2 inch past the home position and stops, then throws the e-22 or e-06 error code. Does anyone know how to reset this?
    Thanks in advance

  2. #2
    Retired 10,000+ Posts
    drum passing home on ricoh 4450

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,131
    Rep Power
    989

    Re: drum passing home on ricoh 4450

    Damaged position sensor(s) on the rear frame. You will need to manually turn the drum to home position to remove it. Tab on the rear flange of the drum is most likely bent and damaging sensors. Some of the sensor may be just knocked loose from their mounts. Some of the mounts could also be damaged. Once you have replaced all damaged parts, including the tab, it should be alright. Do not try straightening any bent metal parts.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here