Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 15
Ricoh DX3243
Hello
I posted the below... and I wondered if someone in this forum could help..
I am looking for some advice on a Ricoh PriPort machine...
The image is randomly moving up and down the page....
I have replaced both the pickup and feed roller, as well as the feed clutch but it has not helped at all... (it was also jamming)
I can't find anything in the service manual that seems to offer any direction and I am unable to find anyone who has any real experience of these machines..
I did wonder if perhaps the drum itself was causing problems and could perhaps be moving / worn in some way..
Any suggestions would be greatly appreciated.
Thanks
-
Sgt Prepper
- Rep Power
- 0
Re: Ricoh DX3243
Been a long time since I've worked on a priport however I remember there is a set screw on the drum drive gear
that loosens up over time and cause print to wander slightly. Hope this helps
-
Technician
- Rep Power
- 22
Re: Ricoh DX3243
[QUOTE = stat; 789759] Bir priport üzerinde çalıştığımdan beri uzun zaman geçti, ancak tambur tahrik dişlisinde zamanla gevşeten
ve baskının hafifçe dolaşmasına neden olan bir ayar vidası olduğunu hatırlıyorum . Umarım bu yardımcı olur [/ QUOTE]
I recommend that you check the Allen screw on the registartion motor.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks