Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Passing Duplication Xpert 1,000+ Posts cobiray's Avatar
    Join Date
    Mar 2008
    Location
    York, PA
    Posts
    1,209
    Rep Power
    32

    RP3105 won't feed master onto drum

    Machine goes to add master to drum and then throws A02-509. Rewind master and then it kicks A02-555. The issue is restricted to the black drum, all 3 other drums work properly. Tried manually placing master on drum and then re running with the same result. I'm assuming it's an issue with the machine locating the a sensor. Just wondering if anyone else has seen this. Machine has almost 6mil on the print counter.


  2. #2
    Passing Duplication Xpert 1,000+ Posts cobiray's Avatar
    Join Date
    Mar 2008
    Location
    York, PA
    Posts
    1,209
    Rep Power
    32
    Figured it out after a lot longer than it should have taken. Previous tech put the incorrect collar on the projection plate, so when the master was loaded onto the drum, the projection plate was actually moving up and hitting the master entrance guide in the machine, catching the master on the edge of the entrance mylar. He owes me a beer.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here