Reset Riso GR3750

[mikadonovan]

Check your email. Hope this info helps.

[davidmadag]

Check your email. Hope this info helps.

Please, can you send this service manual (Riso GR 3750) to davidmadag@parapharma-madagascar.com

I am in Madagascar, desperate with no one to help me with my GR 3750 problem (check paper area).
This machine is used for a humanitarian project.
I'm an electronician and I'm sure this service manual will help me.

Thanks

David

[Iowatech]

For manuals, you might try this:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Good manuals at a decent price there.
In the mean time though, you might try looking underneath the paper tray to see if something is interfering with the lowering process. Also, there is a swinging plate underneath the tray. That plate is connected to the lower safety tray stop switch, if the plate is bent and binding it can cause that message. To a lesser extent, the cover just above the feed rollers should swing up and down freely as well and is connected to the upper safety tray stop switch, if the cover won't move it can cause that message.
Hope that helps.

[davidmadag]

Thanks a lot Iowatech,

Unfortunatly, the website you gave me the Url does not propose the GR 3750 service manual (only user manual)
Any other idea?

Thanks for your advices, I will try again verifying all sensors and switches.

Regards

David
---------

[jermyth]

Yes the manual is there, I just checked. The GR Service Manual listed will work for you.
What Iowatech wrote is good advice too.
Good luck.

[davidmadag]

Thanks Jermyth.
I bought it and sure this will help !

David

[davidmadag]

Thanks for your advices.
My GR 3750 is repaired !

cutted wires by mices !!!

David
--------