Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 37
Riso 1610 has a c25 master stuck
But there is no master stuck to the cylinder. I just received this machine from storage and it gives a c25 code every time I make a master, does anybody have any ideas.
-
Copier Psychologist
250+ Posts
- Rep Power
- 40
It is looking for a master to take off the drum.Load a master by hand, make sure it goes over the round bar and under the clamp.Run a few copies and then try to make a master.
-
check that the rubber bands that strip the master off arent worn or broken, this is a common occurance with this machine.
-
Trusted Tech
50+ Posts
- Rep Power
- 37
It worked!
Thanks guys I cleaned the bands put a blank master on, now it works flawless. Thanks
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks