Duplo DP 430 error code

[sharphead]

A customer has above model with the error code E016 can anyone tell me what this means, or would anyone have access to a service manual.

Any help will be greatly appreciated

[mastkanis]

A customer has above model with the error code E016 can anyone tell me what this means, or would anyone have access to a service manual.

Any help will be greatly appreciated

"E016" is displayed
Does drum shift motor turn when it is
checked using HELP02*?YES Follow the procedure 5.


Regulated power supply
Measure the voltage between the regulated
power supply, +S (+24) and -S(GND)
with the tester. Is it +24V?
Measure the voltage between L and N of the
regulated power supply with the tester. If it is
100V, replace the regulated power supply.

Drive PCB unit&Main PCB
Does replacing the drive PCB unit solve
the problem?
Check the connector and bundled wire
between the drive PCB unit CN1 and
the main PCB CN3. If OK, replace the
main PCB unit.


Drum limit /center sensor
position

Does the drum limit /center sensor status
when it is checked using HELP05**?

Adjust the drum limit /center sensor.


Drum limit /center sensor&Main PCB Unit
Turn the drum limit /center sensor on
and off, and use a tester to measure
voltage. Is voltage normal?
Replace drum limit /center sensor. or Check the bundled wire. If OK, replace
the main PCB unit.

Sideways stepping motor
Does replacing the sideways stepping
motor solve the problem?

شكرا

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com