Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: RISO CZ 100

  1. #1
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,065
    Rep Power
    32

    Question RISO CZ 100

    hello all technician so I have a problem in a RISO CZ 100 when I make a copy .. I see a paper jam is the target 6 .. with a code A-17-209 ... I like help

    BEST TECHNICIAN . NICE PEOPLE .

  2. #2
    Engineer 250+ Posts sweet.persona's Avatar
    Join Date
    Nov 2009
    Location
    Djelfa
    Posts
    378
    Rep Power
    22
    frère zaza
    je croie qu'il ya un master n'a pas été coupé correctement , -1- enlevez le rouleau de master puis refermer le capot de l'unité de création de master .
    2- essai de replacé le master correctement.
    3- l'étiquette apposée sur le coté opposé de la marque (i) de l'axe de rouleau de masters contient des informations nécessaire a l'impression , - LA PAREILLE NE DÉMARRE PAS L'IMPRESSION S'IL NE PEUT PAS LIRE LES INFORMATIONS DE CETTE ÉTIQUETTE .veillez a ce que le rouleau de masters soit bien celui spécifié pour cette appareille et que l'étiquette du rouleau de masters ne soit pas décollée ou abimée .

    A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!


    DAMENE ABDEL AZIZ
    DJELFA


  3. #3
    Engineer 250+ Posts sweet.persona's Avatar
    Join Date
    Nov 2009
    Location
    Djelfa
    Posts
    378
    Rep Power
    22

    May

    I believe there is a master was not cut properly, -1 - Remove the master roll and close the lid of the unity of creation of master.
    2 - test replaced the master properly.
    3 - the label on the opposite side of the mark (i) of the roller shaft Masters contains information needed to print - DO NOT START THE SUCH PRINTING IF CAN NOT READ OVERVIEW OF THIS LABEL. please ensure that the roll of the Masters is well specified for this device and that the label roll Masters is not loose or damaged.

    A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!


    DAMENE ABDEL AZIZ
    DJELFA


  4. #4
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,065
    Rep Power
    32
    merci frére aziz ...

    BEST TECHNICIAN . NICE PEOPLE .

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here