Quote Originally Posted by mrjonolewarne View Post
Yeah my prints are coming out significantly shorter than they should be. I just opened up the machine and found the write roller. I rubbed my finger along it and it seems pretty clean. I will put it in test mode and give it a proper clean soon tho. Would isopropyl alcohol work or should I buy some of this belt cleaner you guys mentioned?
NEVER USE alcohol unless you really really have too. It dry's out rubber and will only make your problem worse. Just soap and water and then some WD40 (if ya got it)
I'd be willing to bet your alin screw has backed out on your write roller (happens all the time) Take the front right cover off and just above the power supply you'll see the motor that drives the write roller. On the shaft of the roller is a pulley, that pulley is set with an alin screw, those things back out all the time.