Thanks:
0
Likes:
0
Dislikes:
0
-
Risograph RP3700 !!SYSTEM ERROR!! T14-150
Hi,
I am new to the world of Risograph printers and I have no access to reliable service people for them, so if I have an issue it will be up to me to fix it.
I am using an RP3700 which I used about 3 months ago, working fine. I tried it for the first time in a few months today and when I switch it on it is stating the error message;
T14–150
!!SYSTEM ERROR!!
I know a few people have been using this model on the forum so I am looking to you guys for some help.
Also once I have sorted this issue I would like to get in connected to my Apple macbook pro.
Any ideas?
Thanks,
Josh
-
Re: Risograph RP3700 !!SYSTEM ERROR!! T14-150
Scanner flatbed error. Timeout error for receiving the risograph scanner command.
1. try turning off, then on.
2. hold reset down while turning on.
3. check wiring harness to scanner, unplug, plug. Pinched wire, loosen wire tires or remove them.
4. get tech manual.
Good luck.
-
Re: Risograph RP3700 !!SYSTEM ERROR!! T14-150
Thanks so much! It seemed to work when I switched it on and off with the reset button pressed.
Could you tell me where I could get a service manual for this machine?
Regards,
Josh
-
Re: Risograph RP3700 !!SYSTEM ERROR!! T14-150
I believe justmanuals.com can help ya. Paul the owner posts on here and has paid ads in the banners.
-
Technician
- Rep Power
- 23
Re: Risograph RP3700 !!SYSTEM ERROR!! T14-150
Hi,i have problem with RN 2530AS.
When i turn ON this machine,display show T98-005.
When i push * key, its show T98-005 & T14-160
Any ideas?
Thxs,
Umar
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks