Riso TR 1510 Error Code : E01

[usa5100]

I have this machine whit error code E01, the machine makes one print, then the second one stay and jam it, then the machine present the error Code E01, the service manuals tells us is over load in the main motor, or the encoder inside the main motor don´t no receive the signal, any help will be apreciated
orlando_useche@hotmail.com

[Iowatech]

I have this machine whit error code E01, the machine makes one print, then the second one stay and jam it, then the machine present the error Code E01, the service manuals tells us is over load in the main motor, or the encoder inside the main motor don´t no receive the signal, any help will be apreciated
orlando_useche@hotmail.com

Is there something that is actually binding in the machine? That's what I'd check first. Like maybe the master clamp on the drum is bent and gets caught on the disposal hooks or something.

[Iowatech]

Might not hurt to reset the machine once by holding the "Reset" key down while turning the machine on once, too.

[usa5100]

Might not hurt to reset the machine once by holding the "Reset" key down while turning the machine on once, too.

Ok I will try it and let you know
Thanks