Driver for Riso CI 300 needed

[bcp]

I have managed to get a copy of CS2000. Not having much luck with tho. Every time I try to open a print file in the program it comes up with "There is an error in the file at BYTE #1" doesn't matter what print driver I use it always comes up with that error. You ever seen that b4. thanks

[techathens]

I have managed to get a copy of CS2000. Not having much luck with tho. Every time I try to open a print file in the program it comes up with "There is an error in the file at BYTE #1" doesn't matter what print driver I use it always comes up with that error. You ever seen that b4. thanks

I have never run into that problem, what operating system are you using?

I am going to upload an ISO image file to my website but if you have access to Nero, go to http://salesoutpro.com/CS2000/CS-2000.nrg for a Nero image file. I will convert to an ISO sometime this weekend and make it available.

[bcp]

I'm using window's XP pro

[techathens]

I'm using window's XP pro

I have run CS-2000 at PakMail in Commerce Georgia on XP Pro and have never had this problem. I wonder if the issue has something to do with the CI300... never tried CS-2000 with that controller.

OK, I know where the problem is (I just tried it myself here on my equipment). The document that you want to open using CS-2000 must be saved as a .prn file for CS to open it. If you need instructions on how to create a PRN, let me know.

Sorry about that!

[bcp]

I presume that I open the file in original program and print to file. I have used the linotronic print diver to make the file and the files are a .prn file

[techathens]

I presume that I open the file in original program and print to file. I have used the linotronic print diver to make the file and the files are a .prn file

That is correct, unfortunately I have been playing around with it here in the office can only get CS-2000 to open PRN's created with an actual RISO print driver, not a generic.

Let me experiment with this and get back to you.

Sorry for the mis-information and confusion.

[bcp]

I'll try it with a riso print driver ,but it's 1.30am now I'll try ater I've had a sleep. thanks for all your help.

[risografist]

CS-2000 doesn’t support PostScript printers like CI300 or linotronic.
CS-2000 used only with GDI RISO interfaces with RisoRinc language.

[Lovenice]

Hello, i've downloaded the software, but it asks me the serial number. Can anybody give me the serial? I'd like to try the software before to buy it, as i need to be sure it works with my risograph. thanks