Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Risograph

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Mar 2008
    Location
    Adelaide, South Australia
    Posts
    54
    Rep Power
    20

    Risograph GR1750 E 03 error

    Hopefully you will log on for this one. I have a Riso GR1750 B4 model that has come up with E 03 error. Are you able to help me on this. thanks

    Last edited by Aneurysm; 04-05-2008 at 06:52 PM. Reason: Moved Post

  2. #2
    Clamp Error (1)
    * In 4 seconds from turning ON of the Clamp solenoid in clamp
    retrial, the Clamp safety switch is held still pressed down.
    * In 4 seconds from turning OFF of the Clamp solenoid, the
    Clamp safety SW has not been pressed.
    * In 8 seconds from turning ON of the Clamp motor in opening
    direction in clamp retrial, the 180
    ° Angular sensor has not
    detected magnet.
    * In 8 seconds from turning ON of the Clamp motor in closing
    direction in clamp retrial, the 0
    ° Angular sensor has not
    detected magnet.
    * In any of the above cases, master making is performed to
    the end.




Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here