Timing on Riso RZ200

[Richard0000]

I have a Riso RZ 200 at my customers premises, the main bearing came out of place and the separator hit the master clamp jamming the machine up and causing some of the other bearing to be knocked off of its cams, I have replaced both separator and the clamp assy' fixed the bearing issue but the problem is that the pages is now only half printed. it seems that the drum timing is out.

I do not have a service manual for this machine.

Please help!

[jermyth]

See Justmanuals.com, Paul has the manual, you need it to re-time it. That and jigs listed in the beginning of the manual.
Good luck.