Dislikes:
0
-
Junior Member
- Rep Power
- 0
Rp3700 Paper-Ejection Mechanism — Separator leaving a middle mark
Dear all
After a 3-sheet jam on a RP3790 it seems the separator is now malfunctioning. It seems to be slightly touching the master/drum, leaving a sharp mark in the middle of the print. I can clearly see the trail of the separator in the master wrapped around the drum. The same thing happens when I try any other drum.
Please any help will be greatly appreciated, I am gutted to think I might have to get it serviced with so many projects in need of completing
d
-
Re: Rp3700 Paper-Ejection Mechanism — Separator leaving a middle mark
Strongly recommend getting a RP service manual. I've attracted chapter 8 paper-ejection section, see page 26 for adjustments.
Good luck
-
Junior Member
- Rep Power
- 0
Re: Rp3700 Paper-Ejection Mechanism — Separator leaving a middle mark
Thanks Riso dude, that was extremely helpful. All fixed now!
Much obliged
Dario
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks