Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Aug 2014
    Location
    Oxford
    Posts
    5
    Rep Power
    0

    Rp3700 Paper-Ejection Mechanism Separator leaving a middle mark

    Dear all


    After a 3-sheet jam on a RP3790 it seems the separator is now malfunctioning. It seems to be slightly touching the master/drum, leaving a sharp mark in the middle of the print. I can clearly see the trail of the separator in the master wrapped around the drum. The same thing happens when I try any other drum.


    Please any help will be greatly appreciated, I am gutted to think I might have to get it serviced with so many projects in need of completing


    d


  2. #2
    Riso dude 250+ Posts jermyth's Avatar
    Join Date
    Mar 2011
    Location
    Land of Diffusion
    Posts
    333
    Rep Power
    19

    Re: Rp3700 Paper-Ejection Mechanism Separator leaving a middle mark

    Strongly recommend getting a RP service manual. I've attracted chapter 8 paper-ejection section, see page 26 for adjustments.

    Good luck

    Attached Files Attached Files

  3. #3
    Junior Member
    Join Date
    Aug 2014
    Location
    Oxford
    Posts
    5
    Rep Power
    0

    Thumbs up Re: Rp3700 Paper-Ejection Mechanism Separator leaving a middle mark

    Thanks Riso dude, that was extremely helpful. All fixed now!

    Much obliged

    Dario


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here