Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: Canon 5070

  1. #1
    Technician
    Join Date
    Apr 2010
    Location
    MANAUS, AMAZONAS
    Posts
    23
    Rep Power
    29

    Question Canon 5070

    Hello!
    Can someone help me ...
    We have a Canon 5070 which does not recognize
    the functions of the finisher: separator,
    stapler, trays and positioning
    the trays, but acknowledges: switching
    paper, input and generates code saída.Não
    error, but generates a message in
    panel "limited functions" finisher
    can not use. "

    What can I do?

    noticed that the version of the board
    finisher is like 6 and another plate
    is like 7. Both are with finisher
    same problem.

  2. #2
    East Coast Imaging 2,500+ Posts
    Canon 5070

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    Go into Additional Functions>Common Settings>Limited Functions Mode and select "OFF" and reboot the machine with the main switch.
    There must have been an error malfunction that caused this.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  3. #3
    Technician
    Join Date
    Apr 2010
    Location
    MANAUS, AMAZONAS
    Posts
    23
    Rep Power
    29
    done the way you said, was active all functions.

    thanks! cheers ...

  4. #4
    Technician
    Join Date
    Apr 2010
    Location
    MANAUS, AMAZONAS
    Posts
    23
    Rep Power
    29
    HI.
    Screwtape, WAS EVEN ON THE SERVICE LIMITED. BUT THAT ONLY
    After I had hung FUNCTIONS, NOT A TRAY OUTPUT
    Correctly place, NOW CHECK THE SENSORS
    POSITION, IS GOOD. WHAT IS A VERSION OF THIS MACHINE IS NOT COMPATIBLE WITH THE FINISHED VERSION? MN-CONT E 1.31
    LUCK 07:01

  5. #5
    Technician
    Join Date
    Apr 2010
    Location
    MANAUS, AMAZONAS
    Posts
    23
    Rep Power
    29
    HI.
    Screwtape, WAS EVEN ON THE SERVICE LIMITED. BUT THAT ONLY
    After I had hung FUNCTIONS, NOT A TRAY OUTPUT
    Correctly place, NOW CHECK THE SENSORS
    POSITION, IS GOOD. WHAT IS A VERSION OF THIS MACHINE IS NOT COMPATIBLE WITH THE FINISHED VERSION? MN-CONT 31.31
    LUCK 07:01

  6. #6
    East Coast Imaging 2,500+ Posts
    Canon 5070

    SCREWTAPE's Avatar
    Join Date
    Jan 2009
    Location
    New York City
    Posts
    3,399
    Rep Power
    69
    Quote Originally Posted by tecaldryn View Post
    HI.
    Screwtape, WAS EVEN ON THE SERVICE LIMITED. BUT THAT ONLY
    After I had hung FUNCTIONS, NOT A TRAY OUTPUT
    Correctly place, NOW CHECK THE SENSORS
    POSITION, IS GOOD. WHAT IS A VERSION OF THIS MACHINE IS NOT COMPATIBLE WITH THE FINISHED VERSION? MN-CONT E 1.31
    LUCK 07:01
    I don't understand what you referring too?
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

  7. #7
    wannaskyline
    Guest

    Re: Canon 5070

    This worked for me on an ir5050. Also made me understand that is something is blocking the output trays it goes into this mode as a safety so that it doesn't break itself. The end users failed to tell me that the machine had asked to go into limited mode...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here