Copytechnet.com - HP http://www.copytechnet.com/forums/ HP Printers and Multifunction Machines en Sat, 21 Nov 2009 01:28:36 GMT vBulletin 60 http://www.copytechnet.com/forums/images/misc/rss.jpg Copytechnet.com - HP http://www.copytechnet.com/forums/ hp lj 4000 win98 http://www.copytechnet.com/forums/hp/27672-hp-lj-4000-win98.html Fri, 20 Nov 2009 15:46:18 GMT does anyone have the print driver for hp lj 4000 for windows 98 does anyone have the
print driver for hp lj 4000 for windows 98 ]]> HP nick_schmidt http://www.copytechnet.com/forums/hp/27672-hp-lj-4000-win98.html <![CDATA[HP4345 13.03 & 13.20 jams]]> http://www.copytechnet.com/forums/hp/27623-hp4345-13-03-13-20-jams.html Thu, 19 Nov 2009 15:46:28 GMT Can anyone advise on the following problem on an HP4345? When copying from either cassette the paper feeds out of the fuser and up into the... Can anyone advise on the following problem on an HP4345?

When copying from either cassette the paper feeds out of the fuser and up into the switchback and jams. The paper is concertina'd up out of the fuser as it is being driven with no where to go. Also there is no image on the sheet. There is also a further sheet fed out of the cassette when only one copy has been asked for. The HP shows a 13.03 jam, once the sheet is removed from the r/h side it then displays the 13.20 jam. If the manual feed is used the machine works fine!
We have had 3 machines with this problem and have been unable to repair them. We have replaced all the boards and formatter. We have replaced 2 machines and now have the same symptoms on a 3rd. There is no help from HP apart from 'replace all the boards'!

Has anyone else come across this fault? ]]> HP Oldslap http://www.copytechnet.com/forums/hp/27623-hp4345-13-03-13-20-jams.html hp m1522nf scaner http://www.copytechnet.com/forums/hp/27481-hp-m1522nf-scaner.html Mon, 16 Nov 2009 22:18:08 GMT error scaner 5,print correct. jump scaner ithing optico motor error scaner 5,print correct. jump scaner ithing optico motor ]]> HP enrique hernandez http://www.copytechnet.com/forums/hp/27481-hp-m1522nf-scaner.html Hp Design jet 488 http://www.copytechnet.com/forums/hp/27462-hp-design-jet-488-a.html Mon, 16 Nov 2009 18:13:23 GMT Any body know how to readjust the printhead to align at the edge of the paper after new belt installacion?:eek: Any body know how to readjust the printhead to align at the edge of the paper after new belt installacion?:eek: ]]> HP Papo http://www.copytechnet.com/forums/hp/27462-hp-design-jet-488-a.html HP P3005x Jammin in tray 1 http://www.copytechnet.com/forums/hp/27446-hp-p3005x-jammin-tray-1-a.html Mon, 16 Nov 2009 15:56:37 GMT I haven't actually seen the machine do it of course but the customer says the page comes a little out of the tray and says jam.

I cleaned the feed tires, but they don't seem worn at all. The meter is 44K.

I have cleaned the tires twice and it works fine for a couple days.

I don't know this machine at all. I don't want to order the feed kit if it is something else causing it.

Thanks ]]> HP tinfox http://www.copytechnet.com/forums/hp/27446-hp-p3005x-jammin-tray-1-a.html Color Laserjet 4600 frozen http://www.copytechnet.com/forums/hp/27144-color-laserjet-4600-frozen.html Mon, 09 Nov 2009 16:27:12 GMT Customer has a Color Laserjet 4600N that freezes during calibration. Will not completely go to ready. It did this for me about a week and a half ago... Customer has a Color Laserjet 4600N that freezes during calibration. Will not completely go to ready. It did this for me about a week and a half ago and I did a cold reset on it already. That took care of it for the week and a half. Now what Im wondering am I going to have to replace a DIMM or formatter or what because obviously there is still an issue. Any help appreciated. Thanks,

J ]]> HP J_Lee http://www.copytechnet.com/forums/hp/27144-color-laserjet-4600-frozen.html My Hp 4200 Laser printer gives me 60.2 error http://www.copytechnet.com/forums/hp/27131-my-hp-4200-laser-printer-gives-me-60-2-error.html Mon, 09 Nov 2009 13:51:03 GMT My broken Hp 4200 printer gives me 60.2 error
when I open. It doesn't receive tray.
If you give me an information about my broken
piece, I will buy a spare part on
this website. Thank you. Have a nice day. ]]> HP emre09 http://www.copytechnet.com/forums/hp/27131-my-hp-4200-laser-printer-gives-me-60-2-error.html HP CLJ 9500 MFP Blank Touchscreen Display http://www.copytechnet.com/forums/hp/27119-hp-clj-9500-mfp-blank-touchscreen-display.html Mon, 09 Nov 2009 07:29:43 GMT Hi all. Working on a HP CLJ9500MFP (the one with the touchscreen). Fault is, all three lights on the left hand side light up, but the display is... Hi all. Working on a HP CLJ9500MFP (the one with the touchscreen).
Fault is, all three lights on the left hand side light up, but the display is blank. Just stays at this state and does not change.
Customer reports it was coming up with different error codes, but cannot recall what any of them were.

What I have done -
Checked display brightness knob.
Reseated all cables on control panel/touchscreen.
Reseated all cables to DC Controller and replaced DC controller.
Removed jetdirect card and hdd.
Tested with new DRAM.
Moved Control Panel EIO card from slot 2 to 1 and tested.
Swapped memory from Control Panel EIO card with formatter memory

Still no luck.

Hoping someone has come across this before. ]]> HP HPLEXKYOPT http://www.copytechnet.com/forums/hp/27119-hp-clj-9500-mfp-blank-touchscreen-display.html HP Laserjet 2840 Copying Issue http://www.copytechnet.com/forums/hp/27033-hp-laserjet-2840-copying-issue.html Thu, 05 Nov 2009 21:48:51 GMT Have a HP Jaserjet 2840 that has a copying issue. When copying in black and white the copies come out as per that attachment. This is both from... Have a HP Jaserjet 2840 that has a copying issue.

When copying in black and white the copies come out as per that attachment. This is both from ADF and the glass.

When copying in colour the copies come out fine.

Prints and faxes come out fine.

Any ideas? Thanks
Attached Files
File Type: pdf Copying Sample.pdf (52.4 KB)
]]> HP jarwil http://www.copytechnet.com/forums/hp/27033-hp-laserjet-2840-copying-issue.html Designjet 500 86:01 http://www.copytechnet.com/forums/hp/26872-designjet-500-86-01-a.html Tue, 03 Nov 2009 02:52:48 GMT Designjet 500 error code: 86:01 I have done the following without success: Cleaned and oiled slider rods. Replaced service station Replaced... Designjet 500 error code: 86:01

I have done the following without success:

Cleaned and oiled slider rods.
Replaced service station
Replaced carriage belt
replaced Y axis motor
replaced trailing cable
Replaced Carriage.

Only thing I havent done is the stupid encoder. Any Ideas? Need some help on this one. ]]> HP rdavisalan@gmail.com http://www.copytechnet.com/forums/hp/26872-designjet-500-86-01-a.html business inkjet 2300 not printing color http://www.copytechnet.com/forums/hp/26871-business-inkjet-2300-not-printing-color.html Tue, 03 Nov 2009 02:48:50 GMT I am working on a business inkjet 2300 HP, it print black and a light pink color.
All other colors don't print.

I have tried the following:

Performed printhead alignment and color calibration
Cleaned printheads from the display menu.
Manually removed and cleaned printheads.
Factory Reset.

I want to try and purge the tubes, does anyone know how to? Or knows a trick. Thanks ]]> HP rdavisalan@gmail.com http://www.copytechnet.com/forums/hp/26871-business-inkjet-2300-not-printing-color.html Hp sanjet 7800 http://www.copytechnet.com/forums/hp/26723-hp-sanjet-7800-a.html Thu, 29 Oct 2009 00:29:43 GMT My hp scanjet 7800 give some error during scanning sometimes "04" and "08" sometimes it's feed more than 2 pages at the time .
It's a brand new scanner 2 month old. Any idea what the problem can be? ]]> HP Realtech http://www.copytechnet.com/forums/hp/26723-hp-sanjet-7800-a.html HP Deskjet 9300 - All leds blinking http://www.copytechnet.com/forums/hp/26696-hp-deskjet-9300-all-leds-blinking.html Wed, 28 Oct 2009 14:06:44 GMT Hi there, I would like to successfully repair an HP Deskjet 9300 but everything I have tried until now does change nothing. Everytime all the... Hi there,

I would like to successfully repair an HP Deskjet 9300 but everything I have tried until now does change nothing. Everytime all the printer leds are blinking, but sometimes I can get it to work. I can print a couple of pages and suddenly it stops and starts blinking again the three leds. I have already checked voltages, cleaning all, oiling sparingly. Ink Carts are new. Service station is clean and dry. The encoder strip is in good conditions and clean.
One thing I have noticed is that the head moves shortly one side and shortly the other side and then the leds start blinking.
The leds are not blinking at the same time, they do that in a asynch manner.
The error trap sequence is C 00E 04 02. The last code 02 means "error_pen_trident_a2d_incomplete".

I would be glad to have some advice or help, thanks. ]]> HP LandRoov http://www.copytechnet.com/forums/hp/26696-hp-deskjet-9300-all-leds-blinking.html hp cm1312 mfp http://www.copytechnet.com/forums/hp/26674-hp-cm1312-mfp.html Wed, 28 Oct 2009 01:42:34 GMT I have a hp cm1312 mfp the problem is the colors misplace out of aligment I try to calibrate 4 time ; firmware has been update; all four toner... I have a hp cm1312 mfp the problem is the colors misplace out of aligment I try to calibrate 4 time ; firmware has been update; all four toner cartridges has been replace same problem. Hp told me to replace the formater board and dc controller after these parts has been replace the problem has not been fix. This printer still under warranty .Any suggest? ]]> HP Realtech http://www.copytechnet.com/forums/hp/26674-hp-cm1312-mfp.html E49.FF81 http://www.copytechnet.com/forums/hp/26666-e49-ff81.html Tue, 27 Oct 2009 22:13:37 GMT hi have got a E49.FF81 on a hp 4370 what is it?? THanks in advance hi

have got a E49.FF81 on a hp 4370

what is it??


THanks in advance ]]> HP Starion http://www.copytechnet.com/forums/hp/26666-e49-ff81.html