http://www.copytechnet.com/forums/ en Fri, 20 Nov 2009 21:54:27 GMT vBulletin 60 http://www.copytechnet.com/forums/images/misc/rss.jpg http://www.copytechnet.com/forums/ http://www.copytechnet.com/forums/toshiba/27626-toshiba-e-studio-3511c.html Thu, 19 Nov 2009 17:07:54 GMT Having a couple of problems, hoping someone can help...

Machine had the "red light - call for service" indication, so we did. Prior to doing so we noticed the machine was VERY hot around the power button area and below. I know it's supposed to be hot there, but this was VERY unusually hot. Repairman came out, hooked is computer up to machine and said he is receiving an error that the hard drive is having issues and probably needs to be replaced. Gave us some quick fix tips to get by in the meantime. He barely addresssed the heat issue other than to say that the fan was running so he wasn't sure why it was getting so hot. Now he is saying that if we get a new hard drive, this should fix all of the problems.

My concern..... isn't it possible that the HOT issue is causing the hard drive error and mayber there is another solution? Don't want to fry another hard drive. Just doesn't seem to make sense to me.

Any input would be GREATLY appreciated!! Thanks very much! ]]> Toshiba lorianneliz http://www.copytechnet.com/forums/toshiba/27626-toshiba-e-studio-3511c.html http://www.copytechnet.com/forums/toshiba/27614-gl-1020-a.html Thu, 19 Nov 2009 13:57:30 GMT Is it max 600x600 dpi or it can be upgraded to more dpi when printing and how to make it ? Thanks.. Is it max 600x600 dpi or it can be upgraded to more dpi when printing and how to make it ? Thanks.. ]]> Toshiba makaule http://www.copytechnet.com/forums/toshiba/27614-gl-1020-a.html http://www.copytechnet.com/forums/toshiba/27594-toshiba-estudio-45-ca1-error-code.html Wed, 18 Nov 2009 22:11:59 GMT I have a Toshiba Studio 45 with the CA1 Error code. I understand that is the laser unit that is bad. I got another laser unit to change. I... I have a Toshiba Studio 45 with the CA1 Error code. I understand that is the laser unit that is bad. I got another laser unit to change.

I started dissasembling the copier to change laser unit, but it seem that I will never get there. IS THERE A EASY WAY TO EXCHANGE the laser unit or you have to take almost the whole copier apart for this procedure.

NEED HELP!!!!!!!!!!!!

Thxs,
RAD ]]> Toshiba impaqsol http://www.copytechnet.com/forums/toshiba/27594-toshiba-estudio-45-ca1-error-code.html http://www.copytechnet.com/forums/toshiba/27485-3511-scan-contrast.html Mon, 16 Nov 2009 23:54:32 GMT Hi There, One of our 3511 recently started scanning very lightly, although copies from the machine are fine (ie. its not the scanner as the same... Hi There,
One of our 3511 recently started scanning very lightly, although copies from the machine are fine (ie. its not the scanner as the same scanner platen is producing great prints)
Been thru all of the settings and the contrast is fine.

Anyone seen this? Is there a way to reset the scanner lamp or calibrate the scanning system?

Thanks
:) ]]> Toshiba macmedic http://www.copytechnet.com/forums/toshiba/27485-3511-scan-contrast.html http://www.copytechnet.com/forums/toshiba/27419-e-166-toshiba.html Mon, 16 Nov 2009 09:11:17 GMT hello to all genius in here just want to ask about the compatible toner for estudio-166 if any. hello to all genius in here just want to ask about the compatible toner for estudio-166 if any. ]]> Toshiba abemelec http://www.copytechnet.com/forums/toshiba/27419-e-166-toshiba.html http://www.copytechnet.com/forums/toshiba/27358-service-code-3500c.html Fri, 13 Nov 2009 18:05:33 GMT Been getting service codes C411 and C412 on the above listed model and was curious as to what this means...Any help would be appreciated....thanks in... Been getting service codes C411 and C412 on the above listed model and was curious as to what this means...Any help would be appreciated....thanks in advance. ]]> Toshiba wulffservice http://www.copytechnet.com/forums/toshiba/27358-service-code-3500c.html http://www.copytechnet.com/forums/toshiba/27350-how-enter-code-estudio-202s.html Fri, 13 Nov 2009 15:11:07 GMT How to enter a code in estudio 202s ? How to enter a code in estudio 202s ? ]]> Toshiba omns23 http://www.copytechnet.com/forums/toshiba/27350-how-enter-code-estudio-202s.html http://www.copytechnet.com/forums/toshiba/27330-e-studio-351c-cf30-error.html Fri, 13 Nov 2009 04:08:14 GMT The m/c gives CF30 error after finishing the print / copy. Service Handbook says cf30 means -Reference plate detection voltage abnormality. I had... The m/c gives CF30 error after finishing the print / copy. Service Handbook says cf30 means -Reference plate detection voltage abnormality. I had replaced the Color Auto Toner sensor unit itself from a working m/c, Still the same problem. All the consumables are replaced just 20 days back only. The copy volume after replacement is only 10K (3K in color) . ]]> Toshiba vasan_rsri http://www.copytechnet.com/forums/toshiba/27330-e-studio-351c-cf30-error.html http://www.copytechnet.com/forums/toshiba/27311-cee0-e-studio-281-a.html Thu, 12 Nov 2009 16:43:01 GMT Hi. I have one e-studio 281 with 700.000 copies.. and she is always giving the error cee0, I already clean the sensors in the transfer belt and the... Hi.
I have one e-studio 281 with 700.000 copies.. and she is always giving the error cee0, I already clean the sensors in the transfer belt and the reflectors inside the belt.
Now she sometimes work fine and other times give this error..
I think that the reflectors aren't 100%. the reflect it's not good..:(
For what I could see, the transfer belt it's not a consumable, and it's a lot expensive.. And this machine is in contract.
Someone already try change the reflectors inside the belt? or have another idea?:confused:
Thanks in advance ]]> Toshiba TTL http://www.copytechnet.com/forums/toshiba/27311-cee0-e-studio-281-a.html http://www.copytechnet.com/forums/toshiba/27299-gl-1020-a.html Thu, 12 Nov 2009 13:56:18 GMT How to make GL 1020 print PDF files faster.. It can take an hour to print 100 pages, when it takes 10 minutes when printing with my Minolta PP... How to make GL 1020 print PDF files faster.. It can take an hour to print 100 pages, when it takes 10 minutes when printing with my Minolta PP 1350.. WTF ??? ]]> Toshiba makaule http://www.copytechnet.com/forums/toshiba/27299-gl-1020-a.html http://www.copytechnet.com/forums/toshiba/27294-e-550-05-206-constantly-changing.html Thu, 12 Nov 2009 08:55:30 GMT e-studio 550 machine... 05-206 developer bias, machine off and when I open each show different values... therefore sometimes very soft copies,... e-studio 550 machine...
05-206 developer bias, machine off and when I open each show different values...

therefore sometimes very soft copies, sometimes very plump. 05-206 value sometimes 81, sometimes 109, somatimes 63, constantly changing.

What could be reason?

]]> Toshiba alpertevfik http://www.copytechnet.com/forums/toshiba/27294-e-550-05-206-constantly-changing.html http://www.copytechnet.com/forums/toshiba/27289-scan-menu-disabled.html Thu, 12 Nov 2009 06:50:12 GMT Hi there , I have two gl1010 studio35 mfp but they have not similar functions ! when I push Printer/network hard button one of them have 3 enabled... Hi there ,
I have two gl1010 studio35 mfp but they have not similar functions !
when I push Printer/network hard button one of them have 3 enabled funtions : Printer/ Scan / admin
but in 2nd scan menu is disabled !
could anyone assit me what's worng ?
what should I do ? ]]> Toshiba masuod http://www.copytechnet.com/forums/toshiba/27289-scan-menu-disabled.html http://www.copytechnet.com/forums/toshiba/27279-need-help-e4511.html Thu, 12 Nov 2009 03:07:09 GMT hi all ! i need help about e4511. how can i lock all color papers when photo and print? my custom want the only black papers on e 4511. ... hi all !

i need help about e4511.

how can i lock all color papers when photo and print? my custom want the only black papers on e 4511.

are there any code or password for this proplem and can set password for only one department to photo and print color papers, the rest is only black papers ????

pls help! if i am not done my custom shall resend this copier to me :o

.... ]]> Toshiba MUMMIM http://www.copytechnet.com/forums/toshiba/27279-need-help-e4511.html http://www.copytechnet.com/forums/toshiba/27250-toshiba-e-550-developer-bulk-problem.html Wed, 11 Nov 2009 16:03:59 GMT Hello. toshiba e-550 in front of the metal on the drum machine developer is poured. Developer new. Developer tank no problem. What could be reason?... Hello.
toshiba e-550 in front of the metal on the drum machine developer is poured. Developer new. Developer tank no problem. What could be reason? bi yardım edin gardaş ]]> Toshiba alpertevfik http://www.copytechnet.com/forums/toshiba/27250-toshiba-e-550-developer-bulk-problem.html http://www.copytechnet.com/forums/toshiba/27246-e-232-a.html Wed, 11 Nov 2009 15:40:14 GMT how do you recalibrate the touch screen on this one. thanks t how do you recalibrate the touch screen on this one. thanks t ]]> Toshiba T911 http://www.copytechnet.com/forums/toshiba/27246-e-232-a.html