Copytechnet.com - Xerox http://www.copytechnet.com/forums/ en Sat, 21 Nov 2009 11:07:22 GMT vBulletin 60 http://www.copytechnet.com/forums/images/misc/rss.jpg Copytechnet.com - Xerox http://www.copytechnet.com/forums/ Best cleaning product for xerox rollers?? http://www.copytechnet.com/forums/xerox/27635-best-cleaning-product-xerox-rollers.html Thu, 19 Nov 2009 19:49:01 GMT What is the best "cleaning" or "rubber renewing" product that
can be safely used on the paper rollers on XEROX copies?

I own a Xerox DOC 250 and have been getting a lot of paper jams lately.

I have used two products in the past.

One is called RUBBER RENEW by a company call M.G. Chemicals.

The other is called SUREWASH ROLL CLEANER by a company called Baumfolder Corporation.

Also, I noticed that there are at least THREE different types of rollers inside of my Doc 250.

There are the "soft" rubber black rollers.

There are the "hard" plastic blask rollers

and there are the "soft" plastic "clear/white" rollers

Is there a product that I can safely use on all of these?

Thanks in advance.

Rob in Vegas ]]> Xerox Oktobernv http://www.copytechnet.com/forums/xerox/27635-best-cleaning-product-xerox-rollers.html DC7000 Edoc required http://www.copytechnet.com/forums/xerox/27584-dc7000-edoc-required.html Wed, 18 Nov 2009 18:44:17 GMT Hi All, i need xerox dc7000 service manual urgently. if any hv it pls share. i hv lots of stuff to exchange. thanks pal Hi All,
i need xerox dc7000 service manual urgently. if any hv it pls share. i hv lots of stuff to exchange.

thanks
pal ]]> Xerox pal.xerox http://www.copytechnet.com/forums/xerox/27584-dc7000-edoc-required.html Starting Problem DC432 ST http://www.copytechnet.com/forums/xerox/27558-starting-problem-dc432-st.html Wed, 18 Nov 2009 11:03:24 GMT Hello together ! At first, I Would like to say Hello to the whole community and second, I would like to post my first question. I have a Xerox... Hello together !

At first, I Would like to say Hello to the whole community and second, I would like to post my first question.
I have a Xerox DC432ST and since a few days it does not want to start anymore. Nothing had been changed.
When I put on the main switch (the black one on the side) I hear a fan for two seconds but when I switch the main switch on the front side, nothing happens.
I have checked the switches and also the fuses. They are ok.

Have someone perhaps an idea what coukd be the cause of that problem or what part I can check? Can I make something like a HardReset?

I would be very thankful if anyone could help me.

Yours
Steve ]]> Xerox steve_nn http://www.copytechnet.com/forums/xerox/27558-starting-problem-dc432-st.html <![CDATA[[XEROX DC440] Problem with the margins]]> http://www.copytechnet.com/forums/xerox/27524-xerox-dc440-problem-margins.html Tue, 17 Nov 2009 15:10:35 GMT I have a problem with the margins. the copy goes out moved of 5 millimeters in comparison to the original one. how can I resolve this problem? which... I have a problem with the margins. the copy goes out moved of 5 millimeters in comparison to the original one. how can I resolve this problem? which is the formulation in the menu of system? Thanks. ]]> Xerox Enzo http://www.copytechnet.com/forums/xerox/27524-xerox-dc440-problem-margins.html 012-323 RAP Puncher Move Home Sensor On Fail http://www.copytechnet.com/forums/xerox/27513-012-323-rap-puncher-move-home-sensor-fail.html Tue, 17 Nov 2009 10:21:31 GMT I have this error intermittently coming up on a Xerox Docucolour 240 any ideas what this refers to? cheers 012-323 RAP Puncher Move Home Sensor... I have this error intermittently coming up on a Xerox Docucolour 240 any ideas what this refers to? cheers

012-323 RAP Puncher Move Home Sensor On Fail ]]> Xerox snook123 http://www.copytechnet.com/forums/xerox/27513-012-323-rap-puncher-move-home-sensor-fail.html Fuser question for Doc 250 http://www.copytechnet.com/forums/xerox/27396-fuser-question-doc-250-a.html Sat, 14 Nov 2009 20:31:49 GMT I was told that it is a good idea to maintain a DIFFERENT fuser model for each SIZE of paper that you run on your Doc 250 machine. For example,... I was told that it is a good idea to maintain a DIFFERENT fuser model
for each SIZE of paper that you run on your Doc 250 machine.

For example, 1 fuser that you install when you run 12x18. A different fuser
that you install when you run 8.5 x 11 and a third fuser when you run 11 x17

This will help to eliminate or minimize lines and streaks in the prints.

I have 3 fusers, so I could easily make this standard practice.

Does this make sense or is this just extra work for no benefit?


Thanks in advance

Rob in Vegas. ]]> Xerox Oktobernv http://www.copytechnet.com/forums/xerox/27396-fuser-question-doc-250-a.html xerox 428 cart prb http://www.copytechnet.com/forums/xerox/27384-xerox-428-cart-prb.html Sat, 14 Nov 2009 12:00:55 GMT i want to know if any way to cancell the change cart code without change it :confused: and if i can to refell it of any kind of toner any tech... i want to know if any way to cancell the change cart code without change it :confused:
and if i can to refell it of any kind of toner
any tech try it plz let me know
thx for all

maj_143@hotmail.com :D ]]> Xerox maj143 http://www.copytechnet.com/forums/xerox/27384-xerox-428-cart-prb.html DocuSP and DC2045/2060 http://www.copytechnet.com/forums/xerox/27383-docusp-dc2045-2060-a.html Sat, 14 Nov 2009 08:06:54 GMT XeroxTechBrazil (http://www.copytechnet.com/forums/members/xeroxtechbrazil.html) you mention in another thread that the DocuSP controller breathes... XeroxTechBrazil you mention in another thread that the DocuSP controller breathes new life into the DC2045/2060. I've a DC2060 on a Fiery EX2000 RIP, could you or anyone else please let me know where the advantages of the DocuSP over the Fiery are?
Thanks in advance. ]]> Xerox GusG http://www.copytechnet.com/forums/xerox/27383-docusp-dc2045-2060-a.html Xerox WorkCentre M35 or DocumenCentre 535 driver win98 http://www.copytechnet.com/forums/xerox/27337-xerox-workcentre-m35-documencentre-535-driver-win98.html Fri, 13 Nov 2009 08:31:45 GMT Since Xerox have deleted all support from theirs web site for Windows 95/98/ME - i do not know where to download it from - Xerox doesn't have it - maybe here I can find it?

I have the Port monitor

In theory it should work with any ps driver - how do you think. Shall I try with XP drivers plus port monitor? ]]> Xerox Roozga http://www.copytechnet.com/forums/xerox/27337-xerox-workcentre-m35-documencentre-535-driver-win98.html DC3535 copy http://www.copytechnet.com/forums/xerox/27333-dc3535-copy.html Fri, 13 Nov 2009 06:04:10 GMT Prints are okay but in copy Inboard side is light and slightly blurred, centre and outboard is fine. Cleaned Scanner, glass, mirrors, any... Prints are okay but in copy Inboard side is light and slightly blurred, centre and outboard is fine.

Cleaned Scanner, glass, mirrors, any suggestions on how to proceed ]]> Xerox davidj7 http://www.copytechnet.com/forums/xerox/27333-dc3535-copy.html workcentre 238 scanner enablement http://www.copytechnet.com/forums/xerox/27325-workcentre-238-scanner-enablement.html Fri, 13 Nov 2009 00:29:30 GMT does anybody have a code to enable scanner features in a workcentre pro 238 ? thank you does anybody have a code to enable scanner features in a workcentre pro 238 ? thank you ]]> Xerox fenave69 http://www.copytechnet.com/forums/xerox/27325-workcentre-238-scanner-enablement.html Docutech 135 fault code http://www.copytechnet.com/forums/xerox/27312-docutech-135-fault-code.html Thu, 12 Nov 2009 18:04:10 GMT Can anyone tell me what a P09-220 fault code is on a Docutech 135? I have checked the Xerox site for this code with no luck. Any assist is much... Can anyone tell me what a P09-220 fault code is on a Docutech 135? I have checked the Xerox site for this code with no luck.

Any assist is much appreciated. ]]> Xerox p0ppasan http://www.copytechnet.com/forums/xerox/27312-docutech-135-fault-code.html Xerox 8860 http://www.copytechnet.com/forums/xerox/27230-xerox-8860-a.html Wed, 11 Nov 2009 11:05:04 GMT Hi I have an intermittent problem with a Xerox 8860 it happens once or twice a day half the print doesn’t come out. I have enclosed a copy of what... Hi I have an intermittent problem with a Xerox 8860 it happens once or twice a day half the print doesn’t come out. I have enclosed a copy of what it’s doing please help!!!
Attached Files
File Type: pdf S45C-209111112021.pdf (195.0 KB)
]]> Xerox snook123 http://www.copytechnet.com/forums/xerox/27230-xerox-8860-a.html Xerox WorkCentre 5655 password http://www.copytechnet.com/forums/xerox/27199-xerox-workcentre-5655-password.html Tue, 10 Nov 2009 17:59:41 GMT Hi,
Need username & password for Xerox WorkCentre 5655 to change IP address.
User name: Admin pass:11111 doesn't work.
Thanks in advance ]]> Xerox bojans http://www.copytechnet.com/forums/xerox/27199-xerox-workcentre-5655-password.html dcc7550/dc250 http://www.copytechnet.com/forums/xerox/27169-dcc7550-dc250.html Tue, 10 Nov 2009 03:09:20 GMT i have the fault code 124-374 i have replace the io pwb n the ess kit but still got the code come out when copy thanks any help ?? i have the fault code 124-374 i have replace the io pwb n the ess kit but still got the code come out when copy thanks any help ?? ]]> Xerox johnner66 http://www.copytechnet.com/forums/xerox/27169-dcc7550-dc250.html