Copytechnet.com - Digital Duplicators http://www.copytechnet.com/forums/ Technical support for Risograph, Duplo, Gestetner and other digital duplicators en Sat, 21 Nov 2009 06:41:23 GMT vBulletin 60 http://www.copytechnet.com/forums/images/misc/rss.jpg Copytechnet.com - Digital Duplicators http://www.copytechnet.com/forums/ Riso rz990 missfeed http://www.copytechnet.com/forums/digital-duplicators/27542-riso-rz990-missfeed.html Tue, 17 Nov 2009 23:18:23 GMT Having a difficult time with a missfeed where it shows a jam in the drum and a jam in the feeder but there is nothing in the drum area and the... Having a difficult time with a missfeed where it shows a jam in the drum and a jam in the feeder but there is nothing in the drum area and the paper/envelope just starts into the machine and is not picked up by the rollers. Blowing air in the feeder sometimes helps - sometimes not. Blowing on the inner rollers and sensors sometimes will clear the problem for some time also, problem always comes back. Sorry this sounds so sketchy. Any help would be appreciated. ]]> Digital Duplicators michaelrhutch http://www.copytechnet.com/forums/digital-duplicators/27542-riso-rz990-missfeed.html Riso GR3750 http://www.copytechnet.com/forums/digital-duplicators/27486-riso-gr3750.html Tue, 17 Nov 2009 00:25:33 GMT Hi everyone, Just have a question on a Riso GR3750. A client has one of these in his office as well as their Sharp MX5500N. The Riso is... Hi everyone,

Just have a question on a Riso GR3750.

A client has one of these in his office as well as their Sharp MX5500N. The Riso is showing 'Call for Service T11'.

I have no idea, and said I would find out some info for him.

Any suggestions? Frankly, I dont care about it as I will not be fixing it. I'm just being friendly and said I would see what the code means. If its something simple.... great...... if not..... I dont want to know about it! ]]> Digital Duplicators wazza http://www.copytechnet.com/forums/digital-duplicators/27486-riso-gr3750.html Master Misfeed http://www.copytechnet.com/forums/digital-duplicators/27116-master-misfeed.html Mon, 09 Nov 2009 04:20:21 GMT I posted to the wrong forum. I think I'm in the right place now.
I am not a technician, but machine problem "fixer" most of the time. Our Riso GR1700 is way out of warranty and the school will no longer call a real repairperson. The error code is C26, but I have been everywhere I can find to look for a master misfeed. How can I access the entrance into the master disposal? Is there a schematic to show just what will move and can be removed? I'm ready to use a hammer.
Thanks. ]]> Digital Duplicators sng4prt http://www.copytechnet.com/forums/digital-duplicators/27116-master-misfeed.html RISO RP3700 http://www.copytechnet.com/forums/digital-duplicators/26897-riso-rp3700.html Tue, 03 Nov 2009 14:43:44 GMT Any one can give me the service for riso rp3700 in boston area, i call riso in danver, ma seem they are to busy right now. May take them a whole... Any one can give me the service for riso rp3700
in boston area, i call riso in danver, ma
seem they are to busy right now. May take them a whole week ,just come to see the machine ]]> Digital Duplicators chairuch http://www.copytechnet.com/forums/digital-duplicators/26897-riso-rp3700.html riso rz 370 error code p98-9 http://www.copytechnet.com/forums/digital-duplicators/26817-riso-rz-370-error-code-p98-9-a.html Sun, 01 Nov 2009 11:22:12 GMT hi this this code appear p98-9 please what is the probleme thanks hi this this code appear p98-9 please what is the probleme thanks ]]> Digital Duplicators popo http://www.copytechnet.com/forums/digital-duplicators/26817-riso-rz-370-error-code-p98-9-a.html riso ks 800 error code C7 http://www.copytechnet.com/forums/digital-duplicators/26816-riso-ks-800-error-code-c7.html Sun, 01 Nov 2009 11:19:03 GMT Please this code **c7** appear when i start this riso help me please Please this code **c7** appear when i start this riso help me please ]]> Digital Duplicators popo http://www.copytechnet.com/forums/digital-duplicators/26816-riso-ks-800-error-code-c7.html Help Help Rp 3700 http://www.copytechnet.com/forums/digital-duplicators/26810-help-help-rp-3700-a.html Sat, 31 Oct 2009 14:38:16 GMT My Rp3700 just stop working yesterday.
It's alway show" Master remain on print cylinder,remove master"
But I try very thing, remove the master, reset the master roll, shut off many time that more than 5 min. But still not working.
Any one kindly help. ]]> Digital Duplicators chairuch http://www.copytechnet.com/forums/digital-duplicators/26810-help-help-rp-3700-a.html Which SC Controller to Which Model http://www.copytechnet.com/forums/digital-duplicators/26729-sc-controller-model.html Thu, 29 Oct 2009 06:11:40 GMT Can anyone tell me what models the SC5500 RIP will work with? Can anyone tell me what models the SC5500 RIP will work with? ]]> Digital Duplicators BluePlanet http://www.copytechnet.com/forums/digital-duplicators/26729-sc-controller-model.html Age of your Risograph http://www.copytechnet.com/forums/digital-duplicators/26728-age-your-risograph.html Thu, 29 Oct 2009 06:07:27 GMT I found this in a Riso HC5500 blog and as I have not seen it anywhere else, I thought the Riso multitudes might be interested. Also kind of explains... I found this in a Riso HC5500 blog and as I have not seen it anywhere else, I thought the Riso multitudes might be interested. Also kind of explains the model letter meaning.

RG Series - RISOgraph 1986
RC Series - RISO Connected 1988
RA Series - RISO Advanced 1991
GR Series - Greater RISO 1994
TR Product - Tiny RISO 1994
CR Product - Compact RISO 1997
FR Series - Finer RISO 1999
RN Series - RISO Networked 2000
RP Series - RISO Printer 2001
V8000 - 2-color one pass 2002
RZ Series - RISO Ultimate 2004
HC5000 -Full color printer 2004
MZ Series - 2 color single pass 2005


]]> Digital Duplicators BluePlanet http://www.copytechnet.com/forums/digital-duplicators/26728-age-your-risograph.html <![CDATA[Greetings & Questions on FR and GR Drums]]> http://www.copytechnet.com/forums/digital-duplicators/26726-greetings-questions-fr-gr-drums.html Thu, 29 Oct 2009 04:45:44 GMT I have a little business in Key West, FL and have wanted to get a Risograph for a long time and have watched eBay a lot. Either too far away or too... I have a little business in Key West, FL and have wanted to get a Risograph for a long time and have watched eBay a lot. Either too far away or too expensive.

Anyway, I just purchased and picked up two Risograph FR2950ui units. They look good and only have 3700 masters and 111000 copies. They were used by a printer and have been in a storage unit for 6 months.
The ink on the masters in the disposal boxes was still wet, so I hope the drums are not dried out. There were no masters so I have those ordered, but can't do anything until I get those.

Which machines were made first, the GR or the FR? I see no drums ever for sale for the FR but I see an occasional drum that are FR/GR. These drums are all 8.5 inches wide. I gather if they have the (W) they are 11 inches for the machines that use those. I assume that the 8.5 will work in machines that also do 11x17. It seems there are different size masters too.

The 8.5 GR drums look the same. I purchased a green one. I figured if they don't work I will get a GR machine too in the not too distant future.

Want to buy some more GR drums as the price is really good. Will they work, and if not, why not? Then, where are all the FR drums? It makes no sense to me to make changes to drums for machines that must be about the same age and have the same specs.

In fact, can anyone explain why Riso has so many different machines that seem to have the same or very similar specs? ]]> Digital Duplicators BluePlanet http://www.copytechnet.com/forums/digital-duplicators/26726-greetings-questions-fr-gr-drums.html Riso 1610 has a c25 master stuck http://www.copytechnet.com/forums/digital-duplicators/26720-riso-1610-has-c25-master-stuck.html Wed, 28 Oct 2009 23:51:33 GMT But there is no master stuck to the cylinder. I just received this machine from storage and it gives a c25 code every time I make a master, does... But there is no master stuck to the cylinder. I just received this machine from storage and it gives a c25 code every time I make a master, does anybody have any ideas. ]]> Digital Duplicators jmart77 http://www.copytechnet.com/forums/digital-duplicators/26720-riso-1610-has-c25-master-stuck.html Riso GR 3770 New Ink Shipment Problem http://www.copytechnet.com/forums/digital-duplicators/26518-riso-gr-3770-new-ink-shipment-problem.html Sat, 24 Oct 2009 02:46:57 GMT Previously my ink supplier's Riso compatible GR 3770 HD black ink has worked fine.

But today's newly received black ink shipment isn't working although the tubes appear to seat properly in the machine: when a tube is inserted in the drum, it didn't remove the Message, "Install Ink Cartridge." The new shipment doesn't say "HD" but it does say, "Digital Duplicator Ink Premium Black: GR/RA/RC series." In addition there is a sticker added that says, "For use in Risograph 3750/3770, RC/RA, 680GRF"

I phoned the supplier and questioned whether the problem is that it isn't HD ink, but they say this is what they ship to 3750 and 3770 machines and it works fine.

Note: I tried using my exhausted cartridge (which does say "HD") again after pushing the disk inside further to the front with a stick, and the machine accepted it like a new cartridge and said "close front cover" so I take that to mean the machine works ok when the ink and cartridge are right.

Question: If I have been supplied non HD ink, should it work anyway in my GR 3770 Riso?

I'm going to talk again Monday with my supplier who is very willing to make things right. Any suggestions about this problem? Thanks, Charles. ]]> Digital Duplicators Bitterroot Charles http://www.copytechnet.com/forums/digital-duplicators/26518-riso-gr-3770-new-ink-shipment-problem.html riso rz 220 http://www.copytechnet.com/forums/digital-duplicators/26491-riso-rz-220-a.html Fri, 23 Oct 2009 12:43:57 GMT hi guys i want to ask if what can you say about this machine is this machine is better than fr model? hi guys i want to ask if what can you say about this machine is this machine is better than fr model? ]]> Digital Duplicators smiley http://www.copytechnet.com/forums/digital-duplicators/26491-riso-rz-220-a.html Used Drums http://www.copytechnet.com/forums/digital-duplicators/26478-used-drums.html Fri, 23 Oct 2009 00:59:20 GMT I've been trying to locate a couple of extra drums for a Standard SD370. Does anyone know for certain if the drums for these models are compatible?
Ricoh JP3000, Standard SD370, Savin 3260DNP, Gestetner 5430, Lanier LDD030 ]]> Digital Duplicators JoeDe http://www.copytechnet.com/forums/digital-duplicators/26478-used-drums.html