Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 38
Laserjet 4100 "40 EIO" error
I'm going to look at a Laserjet 4100 with a "40 EIO" error. What is it? I have no technical infor on this model.
-
Trusted Tech
50+ Posts
- Rep Power
- 39
hp site says to press "go" to clear message and continue printing. "connection has been broken between printer and EIO card". you may want to make sure connection is good between the two.
hth,
ray
-
Technician
- Rep Power
- 36
Hp laserjet 4100 Error code 4o EIO
Error Code 40 EIO
The connection has been broken between the printer and the EIO card in the specila slot.(Data loss might occur in thuis situation.)
(1) Press GO to clear the error message and continue printing.
(2) Reset the EIO card in slot [x].
-
Replace the JetDirect card (probably the 615N). These fail on a regular basis. The replacement units hold up well but the cost is high for a nic.
The new machines have a much improved nic and I have yet to replace one.
-
HP 4100
The connection has been
broken between the printer and the EIO card in the
specified slot. (Data loss might occur in this situation.) REseat the EIO card in the specified slot.
Paul@justmanuals.com
-
4100
If the JetDirect is a 615n type card, go to the HP site. These cards are on a product recall.
Paul
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks