hp designjet 1055cm

[fuseroller]

hi all i am new to site so hope i get it right. i instaled a full maintenance kit to 1055cm plotter[m/c in very bad state to begin with] and it came up with error 0B0006. this error is faulty electronics module. rang hp and they said there is nill available. i am wondering if there is something that i could do fix this. thanks.

[jtymabel]

did you disconnect the trailing cable at the carriage.. (make sure its plugged in properly (also be very careful, if you reverse the order the electronics module may blow a fuse)

[fuseroller]

thanks mate yeh instaled new cable between caridge and module and checked it was in correctly at both end .. i think the customer got rid of it and bought new hp designjet