Have HP Z3200 that gets 86.01. It started out with a 44.10 fan problem. Replaced the fan and no fan errors. Now stat up printer and it goes all the way to Ready for paper. When paper feeds in no matter if its sheet or roll the carriage comes out about 8 inches from the waste station and stops with 86.01. Checked the belt,cleaned encoder,checked rear bushing and lubed rail. Ran all scan axis tests and they pass. With the right cover off i can put a little pressure on the carriage and get it to load a successful sheet or roll of paper and the make a print. All teeth on belt have been checked. There seems to be a little slop in carriage bushing but never had problem before until the fan problem. Like i said it only does it loading paper when the carriage is coming out of the waste station. Can't find binds in carriage or damage to edge of paper. Please help. Read every post i could find and nothing works. Thanks
Bookmarks