Thanks:
0
Dislikes:
0
-
Technician
- Rep Power
- 15
20.0004 in error log.
HP LaserJet Pro MFP M521DN with Error 20.0004 in error logs.
Error 20 is memory error. What does the 0004 mean?
-
Re: 20.0004 in error log.
From this page:
"The printer does not have sufficient RAM to process the fax job."
-
Technician
- Rep Power
- 15
Re: 20.0004 in error log.
I've seen this same error on both a M426 and M477.
The solution I've found (trial and error with HP on the phone the first time, but it worked in both cases), is to go to Setup > Service > Fax Service > Clear Saved Faxes. The users were then able to send and receive faxes as usual.
Prior to "Clear Saved Faxes", when trying to send even a one page fax, the machine would pass the paper through the ADF, and immediately give a message on the display that there was insufficient memory. After going through that procedure, it was a noticeable difference in that it would begin the normal fax process rather than display anything about the memory.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks