Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Field Supervisor 500+ Posts Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    903
    Rep Power
    15

    Re: CP3525 no magenta

    UPDATE

    have tried:
    Upper and Lower HVPS
    Y-M Laser

    all motor/sensor tests respond properly
    drum and developer rollers turn
    taping laser shutter nothing
    disable carts .. swap magenta to cyan and versa problem stayed with magenta slot
    swapped door levers .. no change
    visually checked and felt sensors... all look the same no springs outta place
    cleaned all contacts and innards
    stop test .. no magenta toner on drums nor belt
    engine test w/o formatter no magenta

    could it be the DCC? I mean shit that is about the only thing left!


  2. #12
    Field Supervisor 500+ Posts Wild Bill's Avatar
    Join Date
    Jul 2005
    Location
    Tokyo
    Posts
    678
    Rep Power
    39

    Re: CP3525 no magenta

    This seems interesting I feel for you though.
    Kinda crazy. Keep us up to date with this one. Yes DC controller... it sends the signal to turn on HV.
    Good luck!

    Izzy

  3. #13
    Field Supervisor 500+ Posts Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    903
    Rep Power
    15

    Re: CP3525 no magenta

    Quote Originally Posted by Wild Bill View Post
    This seems interesting I feel for you though.
    Kinda crazy. Keep us up to date with this one. Yes DC controller... it sends the signal to turn on HV.
    Good luck!
    yeah I know... there would be one other thing... main drive gear assm... ain't doing that swap tho...


  4. #14
    Senior Tech 250+ Posts
    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    346
    Rep Power
    9

    Re: CP3525 no magenta

    main drive gear assm... ain't doing that swap tho...
    I hear ya! I actually removed one ONCE because it was out of alignment (so I think........). PITA!!!! Took hours.


  5. #15
    Service Manager 1,000+ Posts theengel's Avatar
    Join Date
    Nov 2011
    Location
    North Bend
    Posts
    1,090
    Rep Power
    29

    Re: CP3525 no magenta

    Gotta remove that to replace the fuser drive assembly. I did one the other day, and literally have a full six hours into this machine (finally found a tiny plug I had missed). Anyway, just got a call this morning for another one. Grrr.

    Anyway, I would think the magenta drum drive wouldn't work if it's the main drive ass. But then, maybe there's a different drive for the developer section. You might try to see if you can get to the dev roller and mark it somehow, to see if it's turning. Maybe it's just the developer motor on the drive assembly.


  6. #16
    Field Supervisor 500+ Posts Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    903
    Rep Power
    15

    Re: CP3525 no magenta

    Quote Originally Posted by theengel View Post
    Gotta remove that to replace the fuser drive assembly. I did one the other day, and literally have a full six hours into this machine (finally found a tiny plug I had missed). Anyway, just got a call this morning for another one. Grrr.

    Anyway, I would think the magenta drum drive wouldn't work if it's the main drive ass. But then, maybe there's a different drive for the developer section. You might try to see if you can get to the dev roller and mark it somehow, to see if it's turning. Maybe it's just the developer motor on the drive assembly.
    i did mark developer roller.. mentioned that in the update. and yes developer drive is part of that same gear train.. it drive off of the drum drive gear no individual motor for the developer.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here