Originally Posted by
nathicana
On the paper feed (registration) assembly the one way gear was slipping so I cleaned it out and put 4 scratches on the shaft. It doesn't slip now when I turn it back and forth by hand. Maybe I should replace it but I have another issue.
I had been getting random blank sheets and 41.05 codes so the pickup solenoids seemed worth a look.
I took the pickup solenoids out to clean them because I could see glue residue that was making them stick. Now both drawers are much worse. D shaped pickup rollers are going around and around multiple times even when cassette is empty. They do eventually stop though. When I manually turn the gears and work the solenoids they seem to work correctly. Any ideas? Thanks
Bookmarks