Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Sep 2011
    Posts
    127
    Rep Power
    14

    HP LJ 4250 returning maint. code

    Hi Folks,
    I have an HP LJ 4250 that the maint. light keeps coming back on, I've done numerous maint. kits, and clean the codes, but 2 weeks later the
    maint. light comes back on...?...memory issue somewhere..?...any help appreciated..

    Thanks... !!
    Jaime
    Indep. Copier Svc.


  2. #2
    Field Supervisor 500+ Posts Wild Bill's Avatar
    Join Date
    Jul 2005
    Location
    Tokyo
    Posts
    682
    Rep Power
    40

    Re: HP LJ 4250 returning maint. code

    Im assuming your doing it like this...


    1. Turn printer off
    2. Turn printer on and during the memory counting up press and hold the green button until the
    ready, attention and data lights come on solid
    3. Release the green  button and the display will say SELECT LANGUAGE; press the up arrow
    once the display will say NEW MAINTENANCE KIT press the green  button to execute
    4. Press the  button to reset the Maintenance Kit counter.
    5. Verify proper reset of maintenance count:
    a. Select “PRINT CONFIGURATION” from the Information menu
    b. Check that the ‘Pages since last maintenance’ entry on the configuration page is set to zero.
    c. If not, repeat steps 1 through 4

    Go into service mode to do it also...
    service mode pin-09425004- You can change the maintenance count and delete error logs.

    Izzy

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here