Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    Senior Tech 250+ Posts
    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    346
    Rep Power
    9

    Re: HP Enterprise MFP M527 Initilization screen After Firmware upgrade

    Last ditch......beyond this, I can only suggest ordering the HP drive that was in there (the M527 can use with a standard or encrypted drive).

    Go into the Pre-boot menu, Format the disk and try reloading the firmware again.


  2. #12
    Senior Tech 250+ Posts fbkhan3's Avatar
    Join Date
    May 2012
    Posts
    302
    Rep Power
    15

    Re: HP Enterprise MFP M527 Initilization screen After Firmware upgrade

    Thanks Lance15

    I could do that but the issue is it will take two weeks to order and get the Original HP HDD client doesn't have any backup printers.



    Regard's


  3. #13
    Trusted Tech 50+ Posts d7guitar's Avatar
    Join Date
    Jan 2007
    Location
    Rockford,IL
    Posts
    54
    Rep Power
    22

    Lightbulb Re: HP Enterprise MFP M527 Initilization screen After Firmware upgrade

    I had a very similar problem with a M4555. Bad HDD. replaced with similar HDD, Formatted in Administrator mode. Loaded Firmware.
    Would not fully boot and come to ready state. stuck on booting screen.
    My fix was to take the formatter with the new HDD to a different 4555. Installed, powered on, and the display went immediately to updating software <do not power off>.
    After booting to ready, I returned The formatter and new HDD to the original device and it operated normally.

    After all is said and done, More is said than done.

  4. #14
    Senior Tech 250+ Posts fbkhan3's Avatar
    Join Date
    May 2012
    Posts
    302
    Rep Power
    15

    Re: HP Enterprise MFP M527 Initilization screen After Firmware upgrade

    d7guitar Thank you,

    Sounds very hopeful, Let me try this one.


    Regard's
    Faisal



  5. #15
    Service Manager 1,000+ Posts theengel's Avatar
    Join Date
    Nov 2011
    Location
    North Bend
    Posts
    1,103
    Rep Power
    30

    Re: HP Enterprise MFP M527 Initilization screen After Firmware upgrade

    I wonder if it's one of those deals where the HD is married to the formatter, and have to be replaced together. Or somehow tricked into thinking they were replaced together.


  6. #16
    Senior Tech 250+ Posts fbkhan3's Avatar
    Join Date
    May 2012
    Posts
    302
    Rep Power
    15

    Re: HP Enterprise MFP M527 Initilization screen After Firmware upgrade

    That sums it up, BTW i just quit on that Printer.

    Regard's


  7. #17
    Sharp & HP Tech 100+ Posts austonrush's Avatar
    Join Date
    Jan 2010
    Location
    Guelph
    Posts
    170
    Rep Power
    17

    Re: HP Enterprise MFP M527 Initilization screen After Firmware upgrade

    Quote Originally Posted by Lance15 View Post
    Last ditch......beyond this, I can only suggest ordering the HP drive that was in there (the M527 can use with a standard or encrypted drive).

    Go into the Pre-boot menu, Format the disk and try reloading the firmware again.

    This is the correct solution, for anyone else coming to this thread, the link below is the full procedure once you have the new drive.

    https://support.hp.com/ca-en/document/c04811591


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here