Working on an m525 with a 30.03.23 error. Power cycling causes code to go away but keeps coming back periodically. Thoughts??
Working on an m525 with a 30.03.23 error. Power cycling causes code to go away but keeps coming back periodically. Thoughts??
It's scanner calibrate failure.Inspect underside of the glass.I'm not sure if this model have label which is used to calibrate the scanner. Maybe is falling off the glass.Clean inside the glass and upgrade last firmware.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Bookmarks