HP 2420dn

[BLITZKREAGG]

Hello fellows,

I have an HP Laserjet 2420dn, I replaced the formatter and now it thinks that it is an 2410, has anybody ran into this sort of issue.
Please any comments will help!!


THANKS IN ADVANCE.

[prntrfxr]

the part numbers for the formatter are the same for all 24xx series printers. However if you put a used formatter from a lower series machine (ie 2410) it confuses the dc controller and the dc controller cant write to the new formatter. the printer then acts and becomes a 2410. As far as I know there is no way to return the printer to 2420, unless there is a hp secret PJL file to upload to it to change it back.

[BLITZKREAGG]

Thank you for your reply.
We just found out that there is a company out of washington that will format both the boards for a small fee.

Thanx