How to change page counter (color mono and total) on HP M451nw printer after replaced formatter board .
Need script (PJL )
Thanks
How to change page counter (color mono and total) on HP M451nw printer after replaced formatter board .
Need script (PJL )
Thanks
To do this you have to have the printer shared and know your computer name. You would then use the command at a dos prompt of:
Netuse lpt3: \\computername\sharename
You substitute the name of your computer and the sharename you have given the printer. If you get the command loaded successfully then you would copy the file to lpt3.
Use this Attached Doc serial.doc Edit the file using the DOS editor to substitue your correct serial number and other info.
You then would type at the command prompt: copy serial.doc lpt3 and hit the enter key.
I can not imagine why is the counter so important on a cheap desktop printer? I do not want to be rude,just curious.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
From service manual
WARNING! Do not install a replacement formatter PCA and DC controller PCA at the same time.The formatter PCA and the DC controller PCA store important product configuration information(NVRAM data) that is lost if both PCAs are replaced at the same time. When the product power isturned on, the DC controller restores the NVRAM data on the replacement formatter.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Bookmarks