Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 14
HP CM4540 doc feeder light green/on from boot
No paper in doc feeder and green light stays on. The problem stays with the printer frame. Have switched with another machine (doc feed assemble, doc feeder PCB, formatter, updated firmware and cold reset). Any ideas? paper present flag checks out fine.
-
Re: HP CM4540 doc feeder light green/on from boot
If you press copy does the df try to feed? Just wandering if the machine is actually recognizing it being installed. If it does, then the df paper detect sensor is not changing, from High to low. I think that's a photo-interrupter? for what ever reason. If not then I am not sure where to go... Power supply?
Good luck and let us know what happens.
-
Technician
- Rep Power
- 16
Re: HP CM4540 doc feeder light green/on from boot
edit---didn't read OP's post carefully enough--nothing to add
-
Re: HP CM4540 doc feeder light green/on from boot
If you have another machine to swap with, try swapping the entire scan assembly. I can't remember, but it seems to me that the doc feed hooks up to the scan assembly, which hooks up to the actual machine.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks